BIBLIOGRAPHY:

The following is a list of Mr. Hatheway’s published work. The numbers in brackets, [ ], are the corresponding AEH document numbers, if applicable.

Most Nastran conference papers are available on-line at: http://www.mscsoftware.com/support/library/conf/wuc86/p013 86.pdf, where,
/wuc86/ = world user conference 1986
/p01386.pdf = paper #13 in the year ‘86

Hatheway, Alson E., “Unified optomechanical modeling: Stabilizing the line-of-sight of an IR imager,” Optical Modeling and Performance Prediction VII, Proceedings of SPIE, 9577-4, ed. Mark A. Kahan (Bellingham: SPIE, 2015) [93998] 79

Hatheway, Alson E., “Unified optomechanical modeling: Thermoelastic stability of a fiber optic diffractive encoding system,” Optomechanical Engineering 2015, Proceedings of SPIE, 9573-20, ed. Alson E. Hatheway (Bellingham: SPIE, 2015) [93997] 78

Hatheway, Alson E., “Mechanical Design of Optical Systems using MSC Nastran,” Case Study: Alson E. Hatheway Inc., ( http://www.mscsoftware.com/case-studies , 2015) [93994]: 77

Hatheway, Alson E., “Use it or lose it,” An Optical Believe It-Or-Not: Key Lessons Learned III, Proceedings of SPIE, 9197-6, ed. Mark A. Kahan (Bellingham: SPIE, 2014) [93992]: 76

Hatheway, Alson E., “The diffraction grating in the Ivory Optomechanical Modeling Tools,” Optical Modeling and Performance Prediction VI, Proceedings of SPIE, 8840-16, ed. Mark A. Kahan (Bellingham: SPIE, 2013) [93986]

Hatheway, Alson E., “On the strength of glass,” Optomechanical Engineering 2013, Proceedings of SPIE, 8837-9, ed. Alson E. Hatheway (Bellingham: SPIE, 2013) [93978]

Hatheway, Alson E., “Linking a laser and an optical imager to a gyro’s axis of rotation in MSC Nastran,” MSC Software 2011 Users Conference, A Collection of Technical Papers (Santa Ana: MSC Software Corporation, 2011). [93974]

Hatheway, Alson E. “Controlling lines of sight and lines of propagation in stable systems,” Optomechanics 2011, Innovations and Solutions, Proceedings of SPIE, 8125-31, ed. Alson E. Hatheway (Bellingham: SPIE, 2011). [93975]

Hatheway, Alson E., “Linking the gyroscope to the imager’s optical axis and the laser in finite element optomechanical models,” Acquisition, Tracking, Pointing and Laser Systems Technologies XXV, Proceedings of SPIE, 8052-21, ed. Willian E. Thompson and Paul F. McManamon (Bellingham: SPIE, 2011). [93970]

Hatheway, Alson E., “Stable platforms: With all this horse manure there must be a pony around somewhere!” An Optical Believe It Or Not: Key Lessons Learned, Proceedings of SPIE, 7796-18, ed. Mark A. Kahan (Bellingham: SPIE, 2010). [93965]

Hatheway, Alson E., “Alignment challenges for optomechanical engineers,” Optical Systems Alignment, Tolerancing, and verification III,” Proceedings of SPIE, 7433-8, ed. José M. Sasian, Richard N. Youngworth (Bellingham, SPIE, 2009) [93957]

Hatheway, Alson E., “Tensile stresses in ring-mounted glass lenses,” Advances in Optomechanics, Proceedings of SPIE, 7424-09, ed. A. E. Hatheway (Bellingham, SPIE, 2009) [93937]

Hatheway, Alson E., “Optomechanics,” Images, Vol. 15, No. 2 (Optical Society of Southern California, November, 2008). [93953]

Hatheway, Alson E., “A rondo in three flats,” An Optical Believe It Or Not: Key Lessons Learned, Proceedings of SPIE, 7071-14, ed. Mark A. Kahn (Bellingham: SPIE, 2008). [93950]

Hatheway, Alson E., “Optomechanics and the Small-Displacement Domain,” Optics and Photonics News, Vol. 18, No. 9 (Optical Society of America, September, 2007) pp 14-16. [93944]

Hatheway, Alson E., “Actuators with 10 mm stroke and less than 300 nm of runout,” New Developments in Optomechanics, Proceedings of SPIE, 6665-28, ed. A. E. Hatheway (Bellingham: SPIE, 2007). [93935]

Hatheway, Alson E., “Random image motion analysis with Ivory 2.0 FE models,” Optical Modeling and Performance Prediction III, Proceedings of SPIE, 6675-14, ed. Mark A. Kahn (Bellingham: SPIE, 2007). [93936]

Hatheway, Alson E., “Ivory Optomechanical Tools for controlling random vibration effects,” New Developments in Optomechanics, Proceedings of SPIE, 6665-21, ed. A. E. Hatheway (Bellingham: SPIE, 2007). [93939]

Hatheway, Alson E., “Designing elastomeric mirror mounts,” New Developments in Optomechanics, Proceedings of SPIE, 6665-03, ed. A. E. Hatheway (Bellingham: SPIE, 2007). [93940]

Hatheway, Alson E., “Optomechanical Modeling of an Optical Image Correlator,” Optical Modeling and Performance Predictions, Proceedings of SPIE, 5867-14, ed. Mark A. Kahn (Bellingham: SPIE, 2005) [93849]

Yoder, P. R., Jr. and Hatheway, A. E., “Further considerations of axial preload variations with temperature and the resultant effects on contact stresses in simple lens mountings,” Optomechanics 2005, Proceedings of SPIE, 5877-05, ed. A. E. Hatheway (Bellingham: SPIE, 2005) [93848]

Morgan, Rhonda M., Agnes, Greg S., Barber, Dan, Dooley, Jennifer, Dragovan, Mark, Hatheway, Al, “The DART cylindrical, infrared, 1 meter membrane reflector,” Astronomical Telescopes and Instrumentation, Proceedings of SPIE, 5494-50, ed. Eli AtadEttedugui, Philippe Dierickx (Bellingham: SPIE, 2004). [93821]

Hatheway, Alson E., “Tests of nanometer-class structural actuators at 30 and 300 degrees Kelvin,” Astromonomical Structures and Mechanisms Technology, Proceedings of SPIE, 5495-32, ed. Joseph Antebi, Dietrich Lemke (Bellinghan: SPIE, 2004). [93796]

Hatheway, Alson E., “Metrology meets nanotech,” MICRO/NANO, the newsletter of tools and products in micro and nanotechnology, Vol. 9, No. 1 (January, 2004) pp 1-2. [93801]

Hatheway, Alson E., “Toward a Standard Nanometer,” oeMagazine, Vol. 3, No. 12 (December, 2003) pp 13-16. [93792]

Burke, P., Caneer, A., Whitehead, A. and Hatheway, A., “Optical correlator system design using opto-mechanical constraint equations to determine system sensitivities,” Optomechanics 2003, Proceedings of SPIE, 5176-6, ed. A. E. Hatheway (Bellingham: SPIE, 2003). [93793]

Hatheway, Alson E., “Error Budgets for Optomechanical Modeling,” Optical Modeling and Performance Prediction, Proceedings of SPIE, 1578-3, ed. Mark A. Kahan (Bellingham: SPIE, 2003). [93685]

“Section 7 Nanometer Surface Texture and Step Height Measurements by Stylus Profiling Instruments,” ASME/B46.1-2002, Surface Texture (Roughness, Waviness and Lay), an American National Standard (New York: American Society of Mechanical Engineers, 2003). [93612]

Nalbandian, R., Hatheway, A. E., “Extra Large Telescope Actuator (ELTA), Large Ground-based Telescopes, Proceedings of SPIE, 4837-94, ed. Jacobus M. Oschmann, Larry M. Stepp (Bellingham: SPIE, 2003) [ ]

Hatheway, Alson E., Specifying and Measuring Nanometer Surface Properties (a seminar prepared for the American Society of Mechanical Engineers) (Pasadena: Alson E. Hatheway Inc., 2002). [93663]

White, C., Salama, M., Dragovan, M., Hatheway, A., Schroeder, J., Barber, D., Dooley, J., “Shaping of Parabolic Cylindrical Membrane Reflectors for the DART Precision Test Bed,” 4 th AIAA Gossamer Spacecraft Forum, Paper Number AIAA-2003-1652 (New York: AIAA, 2003). [93687]

Reflectors for the DART Precision Test Bed,” 4 th AIAA Gossamer Spacecraft Forum, Paper Number AIAA-2003-1652 (New York: AIAA, 2003). [93687]

Hatheway, A. E., “A Survey of Elastic Actuator Applications,” Optomechanical Design and Engineering 2002, Volume 4771-14, ed. Alson E. Hatheway (Bellingham: SPIE, 2002). [93669]

Hatheway, A. E., “A Calibrated Displacement Actuator for Nanometer Metrology,” Nanostructure Science, Metrology and Technology, Volume 4608-17, ed. M. T. Postek, Jr. and M. C. Peckerar (Bellingham: SPIE, 2001). [93643]

Hatheway, A. E., “Thermo-elastic stability of a fiber optic spreadspectrum encoder,” Optomechanical Design and Engineering 2001, Volume 4444-15, ed. Alson E. Hatheway (Bellingham: SPIE, 2001). [93640]

Hatheway, A. E., “Thermo-elastic Design of an Internal-mirror Argon Laser,” ,” Optomechanical Engineering 2000, Volume 4198-14, ed. Mark A. Kahan (Bellingham: SPIE, 2000). [93627]

Hatheway, A. E., “Nanometer-class Structural Actuators and Instruments for Sub-nanometer Metrology,” Optomechanical Engineering 2000, Volume 4198-32, ed. Mark A. Kahan (Bellingham: SPIE, 2000). [93628]

Hatheway, A. E., “Nanometer-class Structural Actuators for Space Missions,” AIAA Space 2000, ed. Jim Renton and Chris Moore (New York: AIAA, 2000). [93621]

Nalbandian, R. and Hatheway, A. E., “Development of a Cryogenic Nanometer-class Repeatability Linear Actuator,” Aerospace Mechanisms Symposium 2000 (New York: AIAA, 2000). [93619]

Hatheway, A. E., “Positioning Accuracy of Primary Mirror Actuators for Large Aperture Space Based Optical Instruments,” Current Developments in Optical Engineering IX, Volume 4093-12, ed. Robert E. Fischer and Warren J. Smith (Bellingham: SPIE, 2000). [93618]

Hatheway, A. E., “Results of Testing of a Nanometer-Class Cryogenic Structural Actuator for NGST,” NGST Science and Technology Exposition, ed. Eric P. Smith and Knox S. Long (Provo, UT: Astronomical Society of the Pacific, September, 1999), pp. 390-4. [93609]

Hatheway, A. E., Type 2 Actuator, Final Report (Pasadena, Alson E. Hatheway Inc., 1999) under contract to NASA Langley Research Center, Hampton, VA (Contract No. NAS1-98035) [93607]

Hatheway, A. E., Owens, D. V., “Cryogenic and room temperature testing of a nanometer-class structural actuator for the Next Generation Space Telescope,” Optomechanical Design and Engineering, Volume 3786-42, ed. Eddy A. Derby, Colin G. Gordon, Daniel Vukobratovich, Paul R. Yoder Jr., Carl H. Zweben (Bellingham: SPIE, July, 1999). [93605]

Hatheway, A. E., “HECTOR: trans-nanometer Z-axis calibration artifacts for semiconductor process control,” Process, Equipment, and Materials Control in IC Manufacturing IV, Volume 3507-30, ed. Anthony J. Toprac, Kim Dang (Bellingham: SPIE, September, 1998). [93521]

Hatheway, A. E., “HECTOR: A trans-nanometer calibration artifact applied to end-to-end validation of an interferometric metrology facility,” Current Developments in Optical Design and Engineering VII, Volume 3429-51, ed. Robert E. Fischer, Lawrence M. Germann, Alson E. Hatheway, Malachy McConnell, Warren J. Smith (Bellingham: SPIE, July, 1998). [93581]

Hatheway, A. E., “Passive cryogenic structural actuators for the Next Generation Space Telescope,” Current Developments in Optical Design and Engineering VII, Volume 3429-48, ed. Robert E. Fischer, Lawrence M. Germann, Alson E. Hatheway, Malachy McConnell, Warren J. Smith (Bellingham: SPIE, July, 1998). [93580]

Hatheway, A. E., “Optical Tolerance: Shortcuts Save Time and Money,” Photonics Spectra, March, 1998, pp. 147-150. [93460]

Hatheway, A. E., “Unified thermal/elastic optical analysis of a lithographic lens,” Lens and Optomechanical Modeling and Design, Volume 3130-16, ed. Robert E. Fischer, R. Barry Johnson, Richard C. Juregens, Warren J. Smith, Paul R. Yoder Jr. (Bellingham: SPIE, July 1997). [93499]

Hatheway, A. E., “The kinetic center of the cantilever beam,” Optomechanical Design and Precision Instruments, Volume 3132-19, ed. Alson E. Hatheway (Bellingham: SPIE, July 1997). [93498]

Hatheway, A. E., “Comparing blade and notch types of flexures,” Optomechanical Design and Precision Instruments, Volume 3132-3, ed. Alson E. Hatheway (Bellingham: SPIE, July, 1997). [93502]

Hatheway, A. E., “Reducing Track Errors Caused by Rotating Micrometer Tips,” Actuator Technology and Applications, Volume 2865-19, ed. Alson E. Hatheway (Bellingham: SPIE, August, 1996). [93459]

Hatheway, A. E., “Single Degree of Freedom Actuators for Controlling Fabry-Perot Etalons,” Actuator Technology and Applications, Volume 2865-11, ed. Alson E. Hatheway (Bellingham: SPIE, August, 1996). [93458]

Hatheway, A. E., “Controlling Non-linearities in Elastic Actuators,” Optomechanical and Precision Instrument Design, Volume 2452-24, ed. Alson E. Hatheway (Bellingham: SPIE, July, 1995). [93440]

Hatheway, A. E., “Alignment of Flexure Stages for Best Rectilinear Performance,” Optomechanical and Precision Instrument Design, Volume 2452-7, ed. Alson E. Hatheway (Bellingham: SPIE, July, 1995). [93435]

Hatheway, A. E., “Metrology for Characterizing Actuators with SubAtomic Repeatability,” Proceedings, ASPE 1994 Annual Meeting (Raleigh, NC, ASPE, October 2-7, 1994). [93417]

Hatheway, A. E., “Analysis of adhesive bonds in optics,” Optomechanical Design, Volume 1998-1, ed. Daniel Vukobratovich, Paul R. Yoder Jr., Victor L. Genberg (Bellingham: SPIE, July, 1993). [93392]

Hatheway, A. E., “A Review of Finite Element Analysis Techniques: Capabilities and Limitations,” Optomechanical Design, Volume CR43-15, ed. Paul R. Yoder, Jr. (Bellingham: SPIE, July, 1992). [93360]

Bella, D., Ghazarian, V. and Hatheway, A. E., “Evaluating Optical Surfaces Using the Finite Element Method,” Computers in Engineering 1991 (New York: ASME, August, 1991). [93343]

Hatheway, A. E., “An overview of the finite element method in optical systems,” Analysis of Optical Structures, Volume 1532-1, ed. Donald C. O’Shea (Bellingham: SPIE, July, 1991). [93339]

Bella, D., Hatheway, A. E. and Ghazarian, V., “Evaluating Optical Surfaces with MSC/NASTRAN,” The MSC 1991 World Users’ Conference Proceedings (Los Angeles: The MacNeal-Schwendler Corporation, March, 1991). [93335]

Hatheway, A. E., “Mountings for a four meter glass mirror,” Advances in Optical Structure Systems, Volume 1303-51, ed. John A. Breakwell, Victor L. Genberg, Gary C. Krumweide (Bellingham: SPIE, April, 1990). [93330]

Hatheway, A. E., “Optical analog analysis of optical fiber sensors,” Precision Instrument Design, Volume 1167 (Bellingham: SPIE, August, 1989). [93222]

Hatheway, A. E., “ An instrument for generation and control of submicron motion,” Precision Instrument Design, Volume 1167 (Bellingham: SPIE, August, 1989). [93221]

Kwong, H. H., Hatheway, A. E., Mufti, A. and Schaudt, K. H., “Precision engineering device to detect the fifth force,” Precision Instrument Design, Volume 1167 (Bellingham: SPIE, August, 1989). [93220]

Kwong, N. H., Hatheway, A. E., Mufti, A., Schaudt, K. J. and Schmitt, H. A., “Search for the Fifth Force Using Gauss’s Law,” Physics Letters A, Volume 139, Number 3,4 (Elsevier Science Publishers B. V., 31 July 1989)

Hatheway, A. E., “Evaluating Stresses in Adhesive Bond Lines,” The MSC 1989 World User’s Conference Proceedings (Los Angeles: The Mac-Neal Schwendler Corporation, March, 1989). [93216]

Hatheway, A. E., “Using Implicit Analogs in Finite Element Analysis,” Computer Applications Symposium, Region IX (New York, ASME, October, 1988). [93212]

Hatheway, A. E., “Optics in the Finite Element Domain,” Computers in Engineering 1988, Volume Three (Book No. G0431C)(New York, ASME, August, 1988). [93206]

Hatheway, A. E., “Optical simulations in the finite element method: an overview,” Simulations and Modeling of Optical Systems, Volume 892 (Bellingham: SPIE, January, 1988). [93204]

Hatheway, A. E., “Optomechanical analysis strategies,” Structural Mechanics of Optical Systems II, Volume 784 (Bellingham: SPIE, January, 1987). [79183]

Hatheway, A. E., “A Modeling Strategy for Analysis of Optomechanical Systems,” MSC/NASTRAN Users’ Conference Proceedings (Los Angeles: The MacNeal-Schwendler Corporation, March 1986). [79175]

Hatheway, A. E., “System Engineering in MSC/NASTRAN,” MSC/NASTRAN Users’ Conference Proceedings (Los Angeles: The MacNeal-Schwendler Corporation, March, 1985). [79164]

Hatheway, A. E., “Finite element methods for evaluating optical system performance,” Optical System Engineering IV, Volume 518 (Bellingham: SPIE, October, 1984). [79054]

Hatheway, A. E., “Evaluating Optical System Performance with MSC/NASTRAN,” MSC/NASTRAN Users’ Conference Proceedings (Los Angeles: The MacNeal-Schwendler Corporation, March, 1984). [4033]

Hatheway, A. E., “Random Vibration in Complex Electronic Structures,” MSC/NASTRAN Users’ Conference Proceedings (Los Angeles: The MacNeal-Schwendler Corporation, March, 1983). [70717]

Hatheway, A. E., “Evaluation of Ceramic Substrates for Packaging of Leadless Chip Carriers,” MSC/NASTRAN Users’ Conference Proceedings (Los Angeles: The MacNeal-Schwendler Corporation, March, 1982). [70713]

Hatheway, A. E. and Montano, C., “Analysis and test of Ceramic Substrates for Packaging of Leadless Chip Carriers,” Designing Electronic Equipment for Random Vibration Environments Proceedings (Los Angeles: The Institute of Environmental Sciences, March 1982). [70712]

Hatheway, A. E. and Wood, O. P., “Packaging of High Voltage Power Supplies for Electric Propulsion,” Proceedings of the Technical Program, National Electronic Packaging and Production Conference (Chicago: Industrial and Scientific Conference Management, February, 1969)

Lacchia, J. F. and Hatheway, A. E., “A Modular Packaging Technique for Combining Integrated Circuits and Discrete Components,” Proceedings of the Technical Program, National Electronic Packaging and Production Conference (Chicago: Industrial and Scientific Conference Management, January, 1968).